Equipment Search:
Advanced Search
Equipment Selection
Spare Parts
WST Quality Control Systems
DGR ShortRun & SingleCopy
Glue application
Three-knife Trimmer
Book saw, Book splitter
Book Stacker
Saddle Stitchers
Conveyor System
Folding Machines
Press Room
Packaging Machine

ShortRun Equipment

Best for PUR


This system is designed only for open glue pots and can keep the PUR glue fresh when not in use. I’m not sure how often you run PUR on your binder but if you do more frequently this system could be of great benefit for you.
There are almost 40 systems sold already worldwide and we are no introducing the system here in the US thru PFP. We have talked and visited a few clients in Germany with great response. The overall feedback we received was very positive and so far, the longest conservation of PUR was up to 5 days. We were told that they clean glue pots every 3 months! Can you imagine not having to drain, clean and have that downtime after running PUR?


The system consists of two units, one being the control unit/supply and the other a large cover. When the PUR production is done, or needs to be interrupted you pull out the glue pot, put the cover over the pot and turn the system on. The system will then create a dry air environment inside of the cover and monitor the status. When you need the glue pot again you just take the cover off and put the glue pot with the same PUR back in.

It is really as easy as it sounds, plus all the benefits and cost savings you gain. Here are some of the items you don’t have to worry about anymore:

• Less PUR waste – no draining required. Just keep the glue in the pot for the next production
• Less time for cleaning, dismantling – safe the time of draining the pot, scraping glue,
  dismantling the parts
• Less time to prepare and fill the pot – use the glue in pot from last production. No need of final cleaning
  for the parts and then installing them
• Less wear on the coating and mechanical parts on pot – cleaning only necessary when no PUR
  production for a longer time.
  Mechanical parts won’t need to be extracted or inserted resulting in less
  wear. Incorrect fitting or installing resulting in damage will be minimized
• Less fumes for the employees – operators will be around fumes less
• Very little maintenance – filters and cleaning of air regulators
• Better flexibility – Be ready when you need to fit a small PUR job in between an EVA job

                   MORE PRODUCTION UP-TIME
< Previous   Next >
  Site Search:
HomeCompany NewsServicePartnersContact UsBrowse

For more information, email us at
©2005-2015 PFP,Inc.  All rights reserved. - Developed & Hosted by impressM,LLC