Equipment Search:
Advanced Search
Equipment Selection
Spare Parts
WST Quality Control Systems
DGR ShortRun & SingleCopy
Glue application
Three-knife Trimmer
Book saw, Book splitter
Book Stacker
Saddle Stitchers
Conveyor System
Folding Machines
Press Room
Packaging Machine

ShortRun Equipment

PUR and EVA Glue pot rebuild

Print Finishing Partners offers complete glue pot rebuilds including new coating of PUR systems

Why coating?

Even the best coating will eventually wear down and cleaning the pot is going to be very hard and time consuming.
We at PFP understand the needs of our clients and have helped them getting their glue pot back to a perfect condition.
Whether it is just a glue roller that needs new coating, a complete glue pot assembly or even rebuilding
the glue pot with new bearings, heaters, etc. We can get the job done!

Complete rebuilds

PUR coating
We completely strip the old parts by sandblasting them. In doing that, we clean and etch them to promote adhesion between the coating and the blasted part. After that they would go to the coating process where we apply 1 coat of primer, 2-4 coats of Ruby Red, and 4-6 coats of a clear topcoat. You will have multiple layers for wear resistance and nonstick.
We ensure the whole part is completely coated 100%!

Benefits of investing in an additional PUR glue pot
When running PUR on a daily base even with a new coating the cleaning and preparing procedure of the PUR glue pot can
be very time consuming. Having a 2nd glue pot and rotating them every day will save time. And once the time comes having
to get a new coating, the second pot will make life easier as well.
Ask us about our current inventory for rebuild PUR glue pots!

Rebuilding EVA glue pots

EVA glue pots are probably the hardest working unit in a perfect binder while being the most neglected part as well.
After years of production the condition of glue pots will get to a point where they create more issues and eat up time.
Rebuilding a glue pot is very time consuming which is why PFP can offer complete rebuilds to get your glue pot back to
its factory condition. We also offer rebuild EVA glue pots!

Check out our latest offers at


Print 2017 Chicago


 We are exhibiting at the Print Chicago 2017

See us at booth 4722.


 Experience our high-resolution signature recognition camera from WST
"Crystal clear" recognition combined with a user-friendly system


 Get a closer look at our Hang drill heads
“Hang drill heads are the most reliable and easy to use on the market!”


 Get updates on the new designed photo book digital equipment by DGR
“Several successful installations in Europe at leading photo book companies”.


Check out the innovation for bookbinders
“Be able to reuse your PUR pot after 5 days without cleaning it”!   

Best for PUR


This system is designed only for open glue pots and can keep the PUR glue fresh when not in use. I’m not sure how often you run PUR on your binder but if you do more frequently this system could be of great benefit for you.
There are almost 40 systems sold already worldwide and we are no introducing the system here in the US thru PFP. We have talked and visited a few clients in Germany with great response. The overall feedback we received was very positive and so far, the longest conservation of PUR was up to 5 days. We were told that they clean glue pots every 3 months! Can you imagine not having to drain, clean and have that downtime after running PUR?


The system consists of two units, one being the control unit/supply and the other a large cover. When the PUR production is done, or needs to be interrupted you pull out the glue pot, put the cover over the pot and turn the system on. The system will then create a dry air environment inside of the cover and monitor the status. When you need the glue pot again you just take the cover off and put the glue pot with the same PUR back in.

It is really as easy as it sounds, plus all the benefits and cost savings you gain. Here are some of the items you don’t have to worry about anymore:

• Less PUR waste – no draining required. Just keep the glue in the pot for the next production
• Less time for cleaning, dismantling – safe the time of draining the pot, scraping glue,
  dismantling the parts
• Less time to prepare and fill the pot – use the glue in pot from last production. No need of final cleaning
  for the parts and then installing them
• Less wear on the coating and mechanical parts on pot – cleaning only necessary when no PUR
  production for a longer time.
  Mechanical parts won’t need to be extracted or inserted resulting in less
  wear. Incorrect fitting or installing resulting in damage will be minimized
• Less fumes for the employees – operators will be around fumes less
• Very little maintenance – filters and cleaning of air regulators
• Better flexibility – Be ready when you need to fit a small PUR job in between an EVA job

                   MORE PRODUCTION UP-TIME
<< Start < Previous 1 2 3 4 Next > End >>

Results 1 - 13 of 46
  Site Search:
HomeCompany NewsServicePartnersContact UsBrowse

For more information, email us at
©2005-2015 PFP,Inc.  All rights reserved. - Developed & Hosted by impressM,LLC